Small Diesel Concrete Mixer Machine-manufacture,factory,supplier from China

The collection of pl concrete batching as a form of forward automated batching gadget matching with mixer equipment, can complete the batching procedure with sand, stone material routinely in keeping with client requirement.This machine is includes garage hopper, weighing system, feeding gadget, electric controlling gadget .the way of feeding may be divided into pneumatic gate and belt type.Undertake electric weighing, laptop controlling, virtual showing, wired far flung controlling, this gadget has many benefit such as accurate weighing, high unique feeding, excessive precise batching, high v

Concrete mixing plant feeding problem solution   There are two ways of feeding concrete mixing plant, belt machine feeding or hopper feeding. The former is mostly used in large stations, while the latter is mostly used in small and medium-sized stations, which is fed by the hopper that comes with the mixer.

  1、Mixing machine　　①Cleaning: Discharge the accumulated material in the mixing barrel after each shift, knock off the cement blocks adhered to the barrel wall and mixing arms, shafts and blades and rinse them with water. Clean the dust on the sprocket cover and bottom travel switch. ② check the fastening bolts: the fastening bolts should be fastened securely, a loose immediately tighten, pay special attention to the mixing blade bolts shall not be loose.

Brief description of the start-up process of concrete mixing plant In a concrete mixing plant, the main mixing machine is an important part, which can be directly related to the output of the whole plant and the quality of the concrete produced. The normal start-up procedure of the mixing plant is crucial, the following is a brief introduction of how to start the mixing machine correctly.First, before starting the concrete mixer on, do a comprehensive inspection of the mixer.Second, start the mixing motor (i.e.

The position of vertical shaft host in concrete mixing plantVertical shaft main machine is an indispensable equipment in concrete mixing plant. It is one of the main production equipments of concrete mixing plant, which is widely used in building engineering, road construction and other related fields.Vertical shaft main machine is mainly used for mixing concrete and the mixing shaft in the mixing process, which can effectively mix cement, aggregate and water together to form a uniform concrete slurry.

Concrete blending station is a building fabric production equipment composed of five fundamental systems: blending host, cloth weighing system, cloth conveying device, cloth garage system, control machine and different ancillary centers.

The following points can be observed during the construction of concrete mixing plant to effectively avoid unnecessary accidentsDuring the construction process of concrete mixing plant, accidents may be caused by staff's operation errors, maintenance, destabilization of machinery and equipment during operation, tipping, poor machine condition, illegal operation, lack of mechanical safety protection facilities and other factors. In order to avoid accidents, the mixing plant managers are required to do the following.1.

  Concrete mixing plant is often damaged by misuse, thus affecting the use of equipment, of which the equipment mixing arm wear is the key to seriously affect the efficiency of the use of equipment, for which the next on the handling of its causes serious wear and tear of equipment to ensure the use.　　1. When placing the mixer, should be placed flat, front and rear axle pad square wood, so that the top of the tires, to avoid moving during the operation of the machine.　　2. The mixer should take secondary leakage protection measures.

This portable concrete/mortar mixer is equipped with wheels and traction tongue, so it can be pulled by motor vehicles and moved around the construction site by hand, and its rotation is powered by mains power. Xxx Allow concrete/mortar to be dumped into the wheelbarrow. An outdated model of a small concrete mixer. These old mixers are too heavy to move easily. They are still self powered by electric motors.For smaller jobs, such as home repairs, renovations, or amateur scale projects, many cubic yards of concrete are usually not required.

The double-screw blade shaft design of the double-shaft mixer makes full use of the cylinder space, and the mixing energy of the blades is released more completely, and the material moves more fully. Therefore, compared with the single-shaft mixer, the double-shaft mixer has shorter mixing time, more uniform mixing effect and higher efficiency.Another feature of the double-axis concrete mixer is the small amount of wear.