Self-Loading Concrete Mixer-manufacture,factory,supplier from China

What are the characteristics and performance of the commercial concrete mixing plant?  1. Excellent environmental protection performance All powder materials, from loading, batching, measuring, adding to mixing and discharging are carried out in an airtight condition. The dust discharge pipes of the mixer cover, cement metering bin and fly ash metering bin are connected to the dust collector, and the dust stopper is set at the aggregate filling port, thus reducing the dust emission.

  Commercial concrete mixing plant consists of mixing system, aggregate supply system, powder storage system, metering system, control system and external equipment.Mixing System  The mixing system is divided into forced mixing and self-falling mixing according to its mixing method. Forced mixer is the mainstream of mixing plant at home and abroad, which can mix various kinds of concrete such as fluidity, semi-dry hardness and dry hardness. The self-falling mixer mainly mixes liquid concrete and is rarely used in mixing plants.

This portable concrete/mortar mixer is equipped with wheels and traction tongue, so it can be pulled by motor vehicles and moved around the construction site by hand, and its rotation is powered by mains power. Xxx Allow concrete/mortar to be dumped into the wheelbarrow. An outdated model of a small concrete mixer. These old mixers are too heavy to move easily. They are still self powered by electric motors.For smaller jobs, such as home repairs, renovations, or amateur scale projects, many cubic yards of concrete are usually not required.

First. Handling of dustFrom the main station to the backyard dust to be solved, the main station adopts high efficiency pulse back-blowing active dust removal, plus large lantern dust removal, installation of mainstream fans to keep the air in the station fresh, powder tank using bin top dust removal and ground centralized dust collection, can also be concentrated on the batching layer platform dust collection, through the screw conveyor to the powder weighing, mixing station using pressurized spray unloading water to reduce the amount of dust in the mixer, the backyard encapsulated above

It is composed of a driving device, a closed tank and a screw. The coal in the tank is pushed and output by the rotation of the screw .The screw conveyor is characterized by simple structure, small cross-sectional size, good sealing, reliable operation and low manufacturing cost. It is convenient for intermediate loading and unloading. The conveying direction can be reversed or transported to the opposite two directions at the same time. Materials can also be stirred, mixed, heated and cooled during transportation. The material flow can be adjusted through the loading and unloading gate.

  1. Compact structure and high production efficiency: modular structure design, the whole station covers an area of small, and can be placed flexibly according to the actual situation on site, multi-directional discharge, optimized design of each component has the same efficiency as the belt conveyor.  2. Smooth operation of the lifting mechanism, low failure rate: the use of dynamic drop point loading, no bias load, smooth lifting; rope loose protection limit, no reversal  3.

To prevent concrete mixer leakage, you could take the following steps:1. Regular protection: make sure to clean the mixer after every use, investigate and update any tired parts, tighten any free bolts, and lubricate the shifting parts.2. Use exquisite substances: use extremely good cement, sand, gravel, and water to make sure the concrete mix is homogeneous and that it flows easily thru the mixer.3. Avoid overloading the mixer: do now not overload the mixer past its capacity, as this could reason the mixer to leak.

There are several ways to prevent concrete mixer leakage:Check the seals: regularly check the seals of the concrete mixer, including the mixer dust sealing device, feeding system sealing device, discharge door sealing device and so on. Make sure the seals are in good condition and have no problems such as aging, wear or cracks.Clean the concrete residue: after each mixing of concrete, the interior and exterior of the concrete mixer should be cleaned in time.

Brief description of the start-up process of concrete mixing plant In a concrete mixing plant, the main mixing machine is an important part, which can be directly related to the output of the whole plant and the quality of the concrete produced. The normal start-up procedure of the mixing plant is crucial, the following is a brief introduction of how to start the mixing machine correctly.First, before starting the concrete mixer on, do a comprehensive inspection of the mixer.Second, start the mixing motor (i.e.

Here are the steps to smooth a concrete mixer:1. Turn off the mixer: earlier than cleansing the concrete mixer, flip off the gadget and unplug it from the strength supply.2. Dispose of the cement: use a spade or shovel to do away with any last cement from the mixer. make sure to put on gloves and goggles to protect yourself from the cement dirt.3. Wash out the drum: fill the mixer with water to approximately halfway and flip it on. let it run for a couple of minutes to thoroughly wash out the drum. then, turn off the mixer and drain the water.4.